specifications of any and all sanyo semiconductor co.,l td. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' sproductsor equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general el ectronics equipment (home appliances, av equipment, communication device, office equipment, industrial equ ipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medica l equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, t ransportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of re liability and can directly threaten human lives in case of failure or malfunction of the product or may cause har m to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for app lications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is n o consultation or inquiry before the intended use, our customer shall be solely responsible for the use. 30409 ms / 31908 ms pc 20070703-s00008 no.a1102-1/6 la7693x series overview the la7693x series is a single-chip video and sound processor ic with a built-in microcontroller that supports all of the different worldwide broadcasting systems. the ic provides fully integrated solution to rationalize the design of color tv sets, increase productivity, and reduce total costs. functions ? i 2 c bus control system with a built-in microcontroller ? vif/sif/y/c/deflection/cbcr in ? adjustment-free vif/sif ? 1x?tal multi-system that supports all broadcasting systems ? no vco coil required ? internal sound carrier bpf, 4-system sound carrier trap ? digital aft system ? supports ew (la76933j, la76938y) ? supports secam (la76936y, la76938y) line-up type name ntsc pal secam deflection cbcr input e/w la76931k la76933j la76936y la76938y monolithic linear ic for ntsc/pal/secam color tvs built-in ctv microcontroller video and sound processing ics (vif/sif/y/c/deflection/cbcr in) orderin g numbe r : ena1102a
la7693x series no.a1102-2/6 specifications maximum ratings (bip chip) at ta = 25 c parameter symbol conditions ratings unit v 8 max 7.0 v v 43 max 7.0 v maximum supply voltage v 55 max 7.0 v i 11 max 25 ma maximum supply current i 19 max 35 ma allowable power dissipation pd max ta 65 c * 1.6 w operating temperature topr -10 to +65 c storage temperature tstg -55 to +150 c * mounted on a substrate : 213mm 140mm 1.6mm, glass epoxy board. absolute maximum ratings (micro-computer chip) at ta = 25 c, v ss = 0v ratings parameter symbol pins conditions min typ max unit mask -0.3 +6.0 v maximum supply voltege v dd max v dd flash -0.3 +6.5 v input voltege v i res -0.3 v dd +0.3 v output voltege v o filt -0.3 v dd +0.3 v input/output voltege v io ports0, 1 -0.3 v dd +0.3 v peak output current *2 i o ph ports04 to 07, 1 ? cmos output ? for each pin. -4 ma high level output current to t a l o u t p u t current i o ah ports04 to 07, 1 the total of all pins. -15 ma peak output current *2 i o pl ports0, 1 for cach pin 20 ma low lever output current toral output current i o al ports0, 1 the total of all pins. 30 ma *1 j : unted on a maskrom = 24kb, k : maskrom = 28kb, l : maskrom = 32kb, m : maskrom = 40kb, n : maskrom = 48kb fb : flashrom = 48kb (this production is produced and sold by sanyo under license of the silicon storage technology inc.) *2 the average current for each pin must not be over 1ma. operating conditions (bip chip) at ta = 25 c parameter symbol conditions ratings unit v 8 5.0 v v 43 5.0 v recommended supply voltege v 55 5.0 v i 11 19 ma recommended supply current i 19 31 ma v 8 op 4.7 to 5.3 v v 43 op 4.7 to 5.3 v operating supply voltege range v 55 op 4.7 to 5.3 v operating supply current range i 11 op 28 to 34 ma i 19 op 17 to 21 ma
la7693x series no.a1102-3/6 recommended operating range (micro-computer chip) at ta = -10 c to +65 c, v ss = 0v ratings parameter symbol pins conditions v dd [v] min typ max unit operating supply voltege v dd v dd max 4.5 5.5 v hold voltage v hd v dd rams and the registers data are kept in hold mode. 2.0 5.5 v vih (1) ports04 to 07 output disable 4.5 to 5.5 0.75v dd v dd v high level input voltage vih (2) ports00 to 03, 1 (schumitt) res (schumitt) output disable 4.5 to 5.5 0.75v dd v dd v vil (1) ports0 output disable 4.5 to 5.5 v ss 0.25v dd v low level input voltage vil (2) ports00 to 03, 1 (schumitt) res (schumitt) output disable 4.5 to 5.5 v ss 0.25v dd v tcyc (1) all functions operat ing 4.5 to 5.5 0.844 0.848 0.852 s operation cycle time tcyc (2) osd and data slicer are not operating 4.5 to 5.5 0.844 400 s oscillation frequency range fmrc internal rc oscillation 4.5 to 5.5 0.4 0.8 3.0 mhz (note) flash-rom erase/write temperature range : ta = 25 2 c (v dd = 4.5 to 5.5v) package dimensions unit : mm (typ) 3300 sanyo : dip64s(600mil) 57.2 0.5 0.95 (1.01) 1.78 (4.25) 3.8 5.1max 0.51min 13.8 15.24 0.2 1 32 64 33
la7693x series no.a1102-4/6 block diagram 1 la76931k/933j + 1 64 2 63 3 62 4 61 5 60 6 59 7 58 8 57 9 56 55 54 12 53 13 52 14 51 15 50 49 17 48 18 47 19 46 20 45 21 44 22 43 23 24 25 26 39 27 38 28 37 29 36 30 35 31 34 32 33 0.01 f 0.015 f (m) 0.47 f (m) 3k ? 100 f v dd hor out 1chip gnd ver out (metal film) v ramp e/w out (933) nc r out g out b out 120 ? 4.7k ? + 0.015 f 1 f 10k ? 1500pf + 0.01 f 100 f rgb 9v 42 ? 0.01 f 0.022 f 0.022 f 10pf 0.01 f 100 f 5v volume out fm out + + + 47k ? 20k ? 750 ? 100 ? 47k ? saw fil 0.01 f 0.047 f 0.47 f 0.1 f 4.43m 0.1 f 100 f + 10 f abl int0/p00 rf-agc if in out video svo/fsc v cc int-v v cc :5v vcd 0.01 f 100 f + v dd an4/p04 an5/p05 an6/p06 an7/p07 int1/p01 p02 int3/p03 irda pwm1/p14 pwm2/p15 p17 pwm3/p16 sda1/p12 sck1/p13 + 1 f 39k ? ext-audio in vm out(933) 16 10 11 + + 1 f ext-v cr 0.1 f cb + 1 f dvd-y + 1 f 0.1 f yc-y yc-c fbp v dd aff reset cpu tst r cpu tst g cpu tst b cvbs pdc enable vs hs r g b fs i data clock c_sync + 1 f + 0.01 f 100 f + 1 f 2.2 f + + 0.47 f 560 ? 12k ? 18pf 18pf 390k ? 680k ? rf rec spll trap osd drive/out-off video amp video det sound det sw trap 500k det bpf sw bpf fm det fm amp lim amp dc rest v/y sw dl sharp bs sg e/w (933) ver ramp hor v cc hor out abl acl ber sep sync sep ber c/d fbp afc2 phase shifter clock control afc1 1/256 hor c/d hor vc0 clock control timer 0 adc bus osd base timer cpu core ram rom osd sw i/0 port 1 i/0 port 0 contrast bright bus bus rst pll hs vs rgb matrix color clamp sw 1h dl clamp dc adj sw yc sw bpf acc apc1 vco vxo dds apc2 tint pal sw demo fsc sw contrast bright video sw sw (933) vm (933) dc vol vif amp if agc aft dah vco clmp clmp clmp clmp nc(933) 42 41 40 0.33 f + + cpu gnd 100 ? 150k ? 1m ? 0.033 f 2.2 f
la7693x series no.a1102-5/6 block diagram 2 la76936y/938y + 1 64 2 63 3 62 4 61 5 60 6 59 7 58 8 57 9 56 55 54 12 53 13 52 14 51 15 50 49 17 48 18 47 19 46 20 45 21 44 22 43 23 42 24 41 25 40 26 39 27 38 28 37 29 36 30 35 31 34 32 33 0.01 f 0.015 f (m) 0.47 f (m) 3k ? 100 f v dd hor out 1chip gnd ver out (metal film) v ramp r out g out b out 120 ? 4.7k ? + 0.015 f 1 f 10k ? 1500pf + 0.01 f 100 f rgb 9v 47 ? 0.01 f 0.022 f 0.022 f 10pf 0.01 f 100 f 5v volume out fm out + + + 47k ? 20k ? 100 ? 47k ? saw fil 0.01 f 0.047 f 0.47 f 0.1 f 0.1 f 100 f + 10 f abl int0/p00 0.01 f 100 f + 0.33 f + + an4/p04 an5/p05 an6/p06 an7/p07 cpu gnd int1/p01 p02 int3/p03 irda pwm1/p14 pwm2/p15 p17 pwm3/p16 sda1/p12 sck1/p13 + 1 f 39k ? ext-audio in vm out(938) 16 10 11 + + 1 f 0.1 f + 1 f + 1 f 1 f nc (r in) + 0.1 f + 0.01 f 100 f 100 ? 150k ? 1m ? 0.033 f 2.2 f 2.2 f + + 0.47 f 560 ? 12k ? 18pf 18pf 390k ? 680k ? rf rec spll trap osd drive/out-off video amp video det sound det sw trap 500k det bpf sw bpf fm det fm amp lim amp dc rest v/y sw dl sharp bs sg e/w (933) ver ramp hor v cc hor out abl acl ber sep sync sep ber c/d fbp afc2 phase shifter clock control afc1 1/256 hor c/d hor vc0 clock control timer 0 adc bus osd base timer cpu core ram rom osd sw i/0 port 1 i/0 port 0 contrast bright bus bus rst pll hs vs rgb matrix color clamp sw 1h dl clamp dc adj sw yc sw bpf acc apc1 vco vxo dds sw sw sw sw apc2 tint pal sw demo secam decoder fsc sw contrast bright video sw sw (933) vm (933) dc vol vif amp if agc aft dah vco clmp clmp clmp clmp nc e/wout (933) rf-agc if in out video svo/fsc v cc int-v v cc :5v vcd v dd ext-v cr in cb dvd-y (fb in) yc-y (g in) yc -c (b in) fbp v dd aff reset cpu tst r cpu tst g cpu tst b cvbs pdc enable vs hs r g b fs i data clock c_sync
la7693x series ps no.a1102-6/6 sanyo semiconductor co.,ltd. assumes no responsib ility for equipment failures that result from using products at values that exceed, even momentarily, rate d values (such as maximum ra tings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-qual ity high-reliability products, however, any and all semiconductor products fail or malfunction with some probabi lity. it is possible that these probabilistic failures or malfunction could give rise to acci dents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause dam age to other property. when designing equipment, adopt safety measures so that these kinds of accidents or e vents cannot occur. such measures include but are not limited to protective circuits and error prevention c ircuits for safe design, redundant design, and structural design. upon using the technical information or products descri bed herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable f or any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagr ams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equi pment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor c o.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities conc erned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any in formation storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. this catalog provides information as of march, 2009. specifications and information herein are subject to change without notice.
|
